Placing an extension tube between the camera body and the lens. The tube has no glass in it; its sole purpose is to move the lens farther from the film or digital sensor. The farther the lens is, the closer the focus (and the bigger the magnification). Also, less light will reach the film or sensor, therefore a longer exposure time will be needed. Reversing the lens using a "reversing ring". This special adapter attaches to the filter thread on the front of a lens and makes it possible to attach the lens in reverse. Excellent quality results up to 4x lifesize magnification using fairly cheap, "standard" (not specially designed for macro) lenses can be produced. Magnification ratio is calculated by dividing the focal length of the normally mounted lens by the focal length of the reversed lens (i.e., when a 50 mm lens is reverse mounted on a 200 mm lens a 4:1 magnification ratio is achieved). So having said that let's get it on. Here is what you are going to need, mostly from the plumbing department at your local hardware store.
Geeks